Lubricate the Solenoid

  1. Ensure the Touch Trainer is off by pressing the Power Button on the back.
    • The green LED should no longer be illuminated.
  2. Carefully push the Solenoid in and rotate it in one direction.
    • If any grinding/restrictive movement is noticed, simply apply a small amount of WD-40 Dry Lubrication to the third spring in. Ensure you are using WD-40 Dry lubrication, not regular WD-40.
    • Push the Solenoid in again and twist until the grinding/restrictive movement is gone
    •    
  3. Clean any excess lubricant with a dry, lint-free towel.