Touch Trainer Will Not Deliver Balls

  1. Attempt to power on the Touch Trainer by pressing the silver Power Button located on the back.
    • A green LED on the back of the Touch Trainer followed by a high-pitched chirp sound will indicate the Touch Trainer is on.
    • It takes roughly 2.5 hours to fully charge your TOCA Touch Trainer.
  2. Connect to the TOCA Touch Trainer.
  3. Ensure that you are only using TOCA custom size 2 balls.
  4. Check the ball pressure of the TOCA Balls using your Pressure Gauge to ensure that they are between 7-9 PSI.
  5. Carefully remove the first TOCA Ball stopped by the Solenoid to allow the rest of the balls to travel down the Spiral Hopper. Place the removed TOCA Ball at the top of your Spiral Hopper.
  6. Perform the Push Test on the Solenoid
    • Carefully push the Solenoid in and rotate it.
    • If any grinding feeling is noticed, simply apply a small amount of WD-40 to the third spring in, push the Solenoid in again and twist until the grinding is no longer noticed.
  7. If the issue is still occurring, please contact Support at or 844.444.TOCA.